TER T&R P-Tronic Plasma Cut 40P Plasma Cutter, 12mm
Portable inverter plasma cutting system, single phase, fancooled, without HF pilot arc striking. PLASMA40 grants outstanding plasma cutting performances and value to fabricators, steel constructions, plumbing, automotive repair. Excellent cut quality on mild steel, galvanized, stainless, aluminium, copper, etc. Direct fitting to any external compressed air source duly provided with preassure regulator (alternatively the pressure regulator can be assembled on the machine back side). Suitable for moto-generator power supply.
MAIN FEATURES |
|
√ |
No HF system, that can damage or interfere with electronics |
√ |
Post-flow cooling provides torch cooling after the cut for a longer torch life |
√ |
Automatic post-flow stop for rapid re-striking |
√ |
Safety pins deactive the torch when consumables are removed |
√ |
Compact dimensions |
√ |
Pilot arc control facilitates un-interrupted cutting on expanded metal or grating |
TECHNICAL DATA |
||||
MODEL |
P-TRONIC 40P |
|||
CODE |
V0042AA |
|||
POWER SUPPLY |
AC 230V / 50Hz |
|||
PRIMARY CURRENT I1 MAX |
24A |
|||
PRIMARY CURRENT I1 eff. |
15A |
|||
FUSE RATING (TIME DELAY) |
T16 |
|||
MAX INPUT POWER |
5,5KVA |
|||
PROTECTION CLASS |
IP21S |
|||
DIMENSION Width-Height-Lenght (mm) |
194X310X450 |
|||
WEIGHT Kg |
10 Kg |
|||
MIN.-MAX. SECONDARY CURRENT |
8A/83V-40A/96V |
|||
OUTPUT CURRENT I2 |
40% 40A |
100% 25A |
||
OUTPUT VOLTAGE V2 |
40% 96V |
100% 90V |
||
MAX NO LOAD VOLTAGE U0 |
260V |
|||
PERFORMANCE |
||||
RECOMMENDED mm |
MAXIMUM mm |
SEVERANCE mm |
||
MILD STEEL |
12 |
18 |
22 |
|
STAINLESS STEEL |
10 |
15 |
18 |
|
ALUMINIUM |
10 |
15 |
18 |